Energy-saving tips for fridges and freezers
Fridges and freezers account for a large proportion of home power usage; after all, they are always on. However, there are ways to save on the electricity output if you have a little knowledge and a solid plan. With that, not only will you be cutting down on your bills, you’ll also be saving energy to help the environment. Let’s check out some of the best energy-saving tips for fridges and freezers, from learning how to defrost a freezer quickly to discovering where to best place your appliances.
Keep It Full
One of the main ways of overworking and wasting energy courtesy of your fridge and freezer is empty space. Every time the door is opened your fridge or freezer has to work hard to replace the cold air that flows out. If you keep your freezer two thirds full less air can get out and therefore less energy is leaked. When you’re getting low you can replace big gaps with water bottles or anything else that fills gaping spaces. Coming back to the door opening, don’t leave it open unnecessarily!
The key here is to make sure that there’s airflow around your appliances. Keep things off the top and, if you can, try to maintain a little room round the sides and back. In addition to that, avoid sitting your fridge and freezer next to the cooker or in a position where it’ll get direct sunlight. You don’t want it to have to work extra hard to combat the heat.
Control The Temperature
Keeping things at a certain temperature definitely helps efficiency and makes food last longer – that’s a double save on wastage! Your fridge should be between 3-5 degrees with freezers operating best at -18 degrees. Keep a check on the gauges, don’t put food in whilst it’s still hot and maintain the equipment to ensure optimum temperatures.
This is probably the most important tip. If you let your fridge or freezer run down into a state of disrepair you are going to lose on a number of fronts. Food and drink won’t last as long, you’ll be paying for the extra electricity required as your appliance fights to work properly, and you’ll have to replace it much quicker than you would if it was looked after. A poor conditioned appliance can be a huge drain on energy, so follow these 3 steps to be more efficient and less wasteful:
- Clean the condenser. This will either be underneath or behind your appliance and is the engine. Dust and grime can easily build up here and if not monitored can cause big problems in temperature control and overall efficiency.
- Check the seals. If these become too worn or worse, split, the door will not close properly. That will mean that air can leak out and a lot of energy will be used to try to keep things cold.
- Avoid ice build up. Keep an eye on things and regularly check to see if a lot of frost has built up. If your freezer doesn’t defrost automatically you can easily learn how to defrost a freezer yourself.
Doing your bit for the environment really isn’t that much hard work and the less you make your fridge or freezer work the more eco friendly it is. From keeping your appliance nice and full to knowing how to defrost a freezer, it’s easy to save energy. Put these simple steps into practice and not only will you be playing your environmental part; you may just see a decrease in your electricity bill too.